11 Cleaning Tips For The Home Swimming Pool

The maintenance of a pool can be difficult at times, but it doesn’t need to be as hard as you think. Different pool have different needs and yours is no exception. What they do have in common however is the need for routine care and attention. Murky water and broken pumps are common enough to be dealt with by you if the need arises, but you must make sure you are working in accordance with manuals provided by the manufacturers when you do so. Before you do that however you will need to know some things. This article aims to provide you with tips to help you out.

• Check the pool chemistry regularly during the summer and winter. Having that in check will allow you to help in keeping algae from thriving in your water.
• Clean out the skimmer baskets on a regular basis as well since they can catch any debris present in the water such as bugs, leaves and more.
• Clean up the lint E9 and hair from the filter in your pump every two weeks or more often depending on your needs. Unplug the pump as you do so to be safe.
• Check and maintain the proper water levels as this is crucial to the operation of the pool. The level should be marked on the tile or skimmer.
• Maintain the chlorine levels with the use of a chlorinator. Chlorine tablets should be present at all times in the mechanism. Take chlorine readings to adjust the content as needed.
• If you have an ozone unit you must make sure its on all the time. Open the valve and adjust the levels as needed, just make sure you’re careful with the machinery as it is delicate.
• Keep any vegetation, animals and garden chemicals away from the pool, as a lot of these will feed the algae inside. Keep the pool covered during the fall season to avoid dealing with great amounts of falling leaves.
• If you see any structural damage in the edge of your pool make sure you address that right away. Leaving it alone will open the way to more damage, furthering the risks involved.
• Having an ozone system will diminish the need for shocking your pool. You should avoid using chlorine-based shock chemicals if you plan on using the pool for swimming soon after the treatment. Allow 24 hours for complete filtration of the water after the treatment.
• Adding catalyst tabs may be necessary, so make sure you do so according to the instructions given to you by the package. Keep them in a dry and cool place to keep them from adhering into a block of chemicals.
• Clean your filters once every few months or after a storm. The frequency of changing those should be about as often as changing the filters of your air conditioning system at home. The dirty filters can be cleaned by using a 10% solution of muriatric acid or alternately a trisodium phosphate solution. Soak them in it and you’ll be able to expect results soon. Use gloves and proper eye protection as these are dangerous chemicals.

No Comments